Custom 3-piece FlexKORE™ Brake Line Kit

FlexKORE™ Brake Line Construction: Features and Benefits

• All brake hoses are constructed using a superior 5 layer hose design:
1. ø1/8"ID X 3/16"OD PTFE (Teflon®) hose
   • 100% compatible with all brake fluids: DOT 3/4/5/5.1
   • Flexible and impact resistant
   • Chemically inert/stable/nonreactive
   • High temperature resistance: Max operating temp = 500°F (260°C)
   • Excellent resistance to aging and degradation
2. Kevlar® braided sheath
   • 5X greater strength to weight ratio than steel
   • Lightweight and flexible
   • Reinforces the Teflon® hose to virtually eliminate expansion under braking without chafing the Teflon® hose
3. Rubber barrier & isolation layer
4. 300 series stainless steel wire braid
• Reinforces the Kevlar® braid for additional resistance to expansion
• Protects the hose from debris and other road hazards
• Excellent corrosion resistance
5. PVC jacket
• Protective outer layer to keep dirt and other abrasives from penetrating the stainless steel braid thereby maximizing the life of the hose.
• Color options: Red, Orange, Yellow, Green, Blue, Black, Smoke (Grey), Clear (Stainless)
• One piece fittings specifically designed and manufactured for use with the 5-layer hose described above resulting in very high fitting pull-off strengths.
• Street Legal: All brake hose assemblies are designed and manufactured to comply with US Federal D.O.T. MVSS-106.
• All hose assemblies pressure tested to 4500 psi [31 MPa] after assembly.
• Hose specifications:
  • Operating Pressure = 1750 psi [12.1 MPa]
  • Burst Pressure = 7000 psi [48.3 MPa]
  • Minimum Bend Radius = 2" [50mm]
  • Outside Diameter = .350" [8.9mm]

Teflon® and Kevlar® are both registered trademarks of DuPont® or its affiliates.