KORE3 BILLET HUB KIT: GM 3RD GEN F-BODY

This KORE3 billet hub kit was designed for GM 3rd generation F-body spindle applications. Please refer to the GM Big-brake Application Chart for vehicle compatability and application specific notes. KORE3 hubs are a clean, strong, lightweight solution for anybody wanting to run slip-on rotors on their 3rd gen Camaro or Firebird. Hubs were designed to complement KORE3 GMF3 big-brake conversion kits.

Notes:

Hub kit is provided with ARP wheel studs, bearings, and seals based on what is selected from the pull down menu below. Wheel studs options are 1/2"-20 screw-in ARP Wheel Studs or M12-1.5 press-in ARPwheel studs. Press-in studs are installed by KORE3 while screw-in studs are shipped loose.

KORE3 billet hubs increase track width by the thickness of the rotor being used, .30" [7.62 mm] per side over stock with C5/C6 components, making the overall track width .60" [15.24 mm] wider than stock. Track width is virtually identical to 1LE rotor configuration.

All 3rd generation GM F-body spindles with single-piston calipers are compatible with these KORE3 hubs. Please contact if using with a 1LE modified spindle.

The following items are included in this kit:

Installation instructions

(2) KORE3 Billet Hubs: GM 3rd gen F-body spindle

CNC machined
6061-T6511 billet aluminum
Dual 5 x 4-3/4" wheel patterns
2.82 lb [1.28 kg] each
Anodized black

(1) Hardware kit
- (10) 1/2"-20 Screw-In ARP Wheel Studs
- OR (10) M12x1.5 Press-In ARP Wheel Studs
- (2) Inner Wheel Bearings
- (2) Outer Wheel Bearings
- (2) Inner Oil Seals
- (2) Grease Caps
- (2) Billet Aluminum Grease Caps

Price: $539.00

Wheel Stud Size

Quantity:

« Previous | Next »

KORE3 News:

Notice: All OE GM Corvette calipers (C6, C6 Z51 and C6 Z06) are no longer in production and limited to either stock on hand, NOS, or used/remanufactured options. We currently have reproduction C6 and C6 Z51 2-piston front and 1-piston rear calipers on hand and ready to ship. Please contact us with any questions.

KORE3 is a proud dealer for Hydratech Braking Systems™, the industry leader in hydraulic brake assist conversions for the pro-touring market. Please plan for approximately 90-120 day deliveries on all hydroboost units until further notice.

Upcoming Closures:

July 7th

August 18th

September 4th & 8th

October 13th

KORE3 and our suppliers are experiencing unprecedented challenges with respect to supply chain issues combined with high levels of demand, so your patience and understanding is always much appreciated. We will continue to strive to provide premium level products and service noting that delivery estimates are just that, estimates.